DescriptionIndustries and ApplicationsResistance to CorrosionFabrication and Heat TreatmentCommon Trade NamesAlloy 625 is a nickel-chromium-molybdenum alloy that is used for its high strength, high toughness and excellent corrosion resistance. The strength of alloy 625 is derived from the stiffening effect of molybdenum and niobium on its nickel-chromium matrix. Although the alloy was developed for high temperature strength, its highly alloyed composition also provides a significant level of general corrosion resistance.INCONEL alloy 625 - Special Metals CorporationINCONEL® nickel-chromium alloy 625 (UNS N06625/W.Nr. 2.4856) is used for its high strength, excellent fabricability (including joining), and out- standing corrosion resistance. Service temperatures range from cryogenic to 1800°F (982°C). Composition is shown in Table 1.
Alloy 625 High Nickel Alloy Tubing American Tube With a chemical composition of 58% minimum nickel, chromium, molybdenum and niobium, nickel alloy 625 tubing has excellent corrosion and oxidation resistance and thermal fatigue strength. These properties make alloy 625 high nickel tubing a common material for chemical processing, heat exchanger, petroleum , automotive, nuclear energy and
Alloy 625 is a Nickel-Chromium based alloy with Min 58% Nickel which gains its stiffening effect through additions of Molybdenum and Niobium thus eliminating the need for this alloy to be aged. It has superior resistance to a wide range of corrosive environments as well as the high temperature effects of oxidation and carburisation.
INCONEL 625 Machinability PTJ ShopInconel 625 chemical composition:Alloy% Nickel Chromium Molybdenum Niobium Tantalum Iron Aluminum ium Carbon Manganese Silicon Copper Phosphorus Sulfur 625 min 58 20 8 3.15 Maximum 23 10 4.15 5 0.4 0.4 0.1 0.5 0.5 0.5 0.015 0.015 Inconel 625 physical properties:Density 8.4 g / cm3 Melting point 1290-1350 Inconel 625 The minimum
INCONEL Alloy 625 - Mega MexInconel 625 is a corrosion and oxidation resistant nickel alloy that is used both for its high strength and outstanding aqueous corrosion resistance. Its outstanding strength and toughness is due to the addition of niobium which acts with the molybdenum to stiffen the alloys matrix.
Details Chemical Data, Mechanical Properties and Specifications for Nickel Alloy 625. Inconel® 625 is a nickel-chromium-molybdenum alloy with niobium added to provide high strength without the need to further harden. Because of this high strength, Alloy 625 can be used to cut thickness and weight from tubing and other forms, thereby improving the transfer of heat.
Inconel 625 Nickel Alloy AlloysInconel® 625 is a nickel-chromium-molybdenum alloy with niobium added to provide high strength without the need to further harden. Because of this high strength, Alloy 625 can be used to cut thickness and weight from tubing and other forms, thereby improving the transfer of heat. This alloy is extremely corrosive resistant in severe environments.
Inconel 625 Pipe, Alloy 625 Seamless Pipe, Ni 625 hot Manufacturer of Alloy 625 Seamless Pipe, Check Dimension and Sizes of Ni 625 hot finished pipe. There are different specification, dimensions, forms, material of industrial products but if we talk about the rating or pressure ratings of pipes so they are also different from each other but Inconel 625 Pipe is an industrial products which has the pressure ratings as according to the temperature
Inconel 625® is a high strength, nickel-based alloy with extreme temperature capabilities (cryogenic up to 2,000°/1,093°C). This nonmagnetic material is also known for its excellent toughness and fatigue strength, and high corrosion and oxidation resistance. Inconel 625® Bar for All Applications
Nickel Alloy 625 - United Performance MetalsNickel Alloy 625 1 .888 282 3292 UPMET.COM. Type 625 Alloy (UNS Designation NO6625) is an austenitic nickel-based superalloy possessing excellent resistance to oxidation and corrosion over a broad range of corrosive conditions, including jet engine environments and in many other aerospace and chemical process applications.
Nickel Alloy 625 / Inconel 625 (UNS N06625) - Aircraft Alloy 625 (UNS N06625) is a nickel-chromium-molybdenum alloy with an addition of niobium. The addition of molybdenum acts with the niobium to stiffen the alloy matrix, providing a high strength without a strengthening heat treatment. The alloy resists a wide range of corrosive environments and has a good resistance to pitting and crevice corrosion.
Nickel Alloy 625 Particle size distribution is measured by laser diffraction as per ASTM B822. Due to the high sphericity and very low satellites present on AP&C powder, the particle size distribution is highly uniform and the D10, D50 and D90 meet and exceed the industry requirements with an exceptional batch to batch reliability.
Nickel Alloys 625 Advanced PowdersNickel Alloy 625 Particle size distribution is measured by laser diffraction as per ASTM B822. Due to the high sphericity and very low satellites present on AP&C powder, the particle size distribution is highly uniform and the D10, D50 and D90 meet and exceed the industry requirements with an exceptional batch to batch reliability.
Nickel Alloys Alloy--625 Alloy-825 Special Piping Inconel Alloy 625 This nickel-chromium-molybdenum-niobium alloy offers the user outstanding corrosion resistance and excellent weldability. The addition of niobium to the alloy delivers high strength but without the need for heat treatment. Like Inconel alloy 825, the high nickel content means that Alloy 625 is immune to chloride-induced stress
625:N06625:21:bal:9-3:Well-known nickel alloy with excellent high-temperature strength and outstanding aqueous corrosion resistance. C-276:N10276:15:bal:16-5:One of the best-known nickel alloys with excellent corrosion resistance to reducing acids. 600:N06600:16:76--8:Useful resistance to high-temperature corrosion and caustic
Types of Nickel Alloys and their PropertiesJan 18, 2021 · These alloys of nickel add chromium and molybdenum to add creep rupture strength to the alloy. Alloy 617 is an example, sold under the trade names Inconel 617 ® and Nicrofer ® 617, which has a composition of 20-24% chromium, 10-15% cobalt, and 8-10% molybdenum with a minimum nickel content of 44.5%.Nickel Alloy 625 McMaster-CarrHigh-Strength 625 Nickel Sheets. Yield Strength:60, 000 psi. Hardness:Rockwell B95 (Medium) Temper Rating:Softened (Annealed) Specifications Met:ASTM B443, SAE AMS5599. A blend of nickel, chromium, and molybdenum gives 625 nickel the strength, weldability, and corrosion resistance necessary for use in expansion joints, exhaust systems, and marine components.